Observation 413236: METEOR-M 2 (40069)

[Rico]

SatNOGS does not have an LRPT demodulator yet, to get images and a waterfall image with a bandwidth large enough to contain the full signal you have to add a LRPT demodulator and processor manually. The stations you are referring to have done that.

There are some instructions on how to do it here:

Meteor MN2 decoder for rpi 3B+

Hi all, Here is a quick set of instructions on making the pi3b+ work to demod Meteor LRPT and auto upload it. cgbsat[m] and Darkside deserve the most credit as they did the ‘technical’ stuff; On the pi3, install imagemagick for the ‘convert’ utility by doing sudo apt-get install imagemagick I used an 8Gb USB flash plugged into the pi and mounted on /datadrive/ easier to wear out a USB than to break the internal SD card with lots of writes. make the /datadrive directory owned by satnogs:satnog…