Received just now over Laos 
6 Likes
reminder for all that received the signal
3 Likes
very clear and strong morse code
2 Likes
Thank you Team INNOCUBE!
Myself, Rajesh Vagadia VU2EXP received Special Christmas Greeting messages from Rajkot (ML52JH) Gujarat - INDIA via INNOCUBE (TubSat 31) Satellite on CW mode on 24th December 2025 at 06:07 UTC. It was 71 deg pass at my grid ML52JH
Total 3 CW messages were decoded successfully with strong signals on 437.02 MHz
I am mailing decoded messages with CW audio recording for my eQSL card.
thanks & 73
Rajesh Vagadia VU2EXP
Rajkot - Gujarat INDIA
Regional Coordinator
AMSAT-INDIA
Amateur Radio Society of India
4 Likes
Messages received and mail is send
merry xmas!
3 Likes
10:46 UTC. I did not expect to receive such a clear signal from this broadcast with my turnstile antenna, since AOS at my QTH in Greece was at 10:45 UTC.
6 Likes
Success!! Merry Christmas and Happy New Year!
2 Likes
I’m really glad that so many of you already received the beacon. Merry Christmas to everyone!
5 Likes
It was exciting, with such a strong signal at only 16-17 deg from my QTH. I’m traveling right now, but i’ll email my recording and a picture of my helper elf soonish.
Thanks for the event. Its been fun.
3 Likes
Strong signal at 21:26 UTC
DP1NNO 7.31 DEG C MERRY CHRISTMAS 2025
DP1NNO 9.62 DEG C MERRY CHRISTMAS 2025
DP1NNO 10.62 DEG C MERRY CHRISTMAS 2025
Many thanks for this transmission to S. Europe.
5 Likes
Strong signal received in Brazil… I’m having a lot of difficulty pointing the antenna with my portable setup because unfortunately I’ve developed a major problem with my right hand (I’m going to have surgery this week 
).
I’m writing this post with difficulty 
. As soon as I feel better, I will share my results, but HERE is the observation from my SatNOGS station.
Merry Christmas to all and thank you @vici for scheduling this transmission for Brazil (I didn’t expect this problem with my hand, so I won’t be able to receive the satellite at 13:54UTC).
5 Likes
keep safe and health bro. 
2 Likes
finally i know, -.-.- = #
merry christmas! so the xx deg c on morse is temperature right? what temperature is that?
2 Likes
Hey Bali,
You can use this website its a morse code translator Morse Code Translator | Morse Code World
2 Likes
Thank you so much. Yesterday got all three beacons at the requested time. Very strong and clear signal (30dB over -95 noise floor). Already sent them to request eQSL. Merry christmas!
4 Likes
In Morse code, “CT” is a “prosign” (procedural signal) meaning “Commence Traffic” or “Start of Message”, representing the beginning of a transmission, written as -.-.- without spaces between the letters.
6 Likes