[ENSO] Near reentry and last beacon game

[EU1SAT]

@bali

waiting the tutorial..

For decoding I used:

1. My *.KSS File from GetKISS+ (DK3WN)
2. kiss_csv.py from @SA2KNG :
   GitHub - kng/geoscan-tools: Process frames from satellite Geoscan-Edelveis
3. FAR (File and Archive Manager)
4. HxD HEX Editor.

Please read:

RamSat mission progress

Glad to help! First, please let me say that two things are required to produce an image. #1, you need a capture that starts at the exact beginning of a file & ends at the exact end of a file. #2, you need to have ALL of the packets (in the correct order) with none missing. Of course, neither of these things will happen ‘live’ in a single capture ( by one station alone ) unless you are extremely lucky! So, before using my script (or any tool) to convert the decoded packets to a JPG image fi…

Jielong-3 - CAMSAT CAS-5A - 2022-12-09 06:35 UTC

With decodes from -2- passes received mostly by N6RFM plus some from my own location, a 100% complete JPG image (#6) was assembled! Unfortunate that it’s not one of the ‘nice’ pictures, but it was great to use the sequence numbers to put together a JPG with no missing packets. [cas5a-6] [2-SatNogs-packets-function-codes]

Sharjahsat-1 images decoding

Hi, I did look at the new frames and my old code again, it doesn’t handle several different images so the input file need to be filtered accordingly. I did manage to get almost the full image as seen above. However, I think the image transmission format is a bit hard to implement, especially from DB. First off, the counter goes down so addressing with this becomes inverted. Second, even if most frames are 246B long, the last two frames (0 and 1) are not full length, which means you cannot use …

After careful reading, you will see that the information I posted above is enough to manually decode the image.

Huge thanks to @K4KDR and @SA2KNG for the information and programs.