Dire Wolf version 1.5 Includes optional support for: gpsd  Reading config file direwolf_aprs_9k6.conf Audio device for both receive and transmit: default (channels 0 & 1) Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, E+, 48000 sample rate. Channel 1: 9600 baud, K9NG/G3RUH, +, 48000 sample rate x 2. The ratio of audio samples per sec (48000) to data rate in baud (9600) is 5.0 Increasing the sample rate should improve decoder performance. Note: PTT not configured for channel 0. (Ignore this if using VOX.) Note: PTT not configured for channel 1. (Ignore this if using VOX.) Ready to accept AGW client application 0 on port 8000 ... Ready to accept KISS TCP client application 0 on port 8001 ...  SR9KRA-6 audio level = 199(58/53) [NONE] _:|||____ Audio input level is too high. Reduce so most stations are around 50. [0.2] SR9KRA-6>APDST4-6,WIDE1-1,WIDE2-1::SP6ZWR:KrakSat START U1! ------ U frame UI: p/f=0, No layer 3 protocol implemented., length = 55 dest APDST4 6 c/r=0 res=3 last=0 source SR9KRA 6 c/r=0 res=3 last=0 digi 1 WIDE1 1 h=0 res=3 last=0 digi 2 WIDE2 1 h=0 res=3 last=1 000: 82 a0 88 a6 a8 68 6c a6 a4 72 96 a4 82 6c ae 92 .....hl..r...l.. 010: 88 8a 62 40 62 ae 92 88 8a 64 40 63 03 f0 3a 53 ..b@b....d@c..:S 020: 50 36 5a 57 52 3a 4b 72 61 6b 53 61 74 20 53 54 P6ZWR:KrakSat ST 030: 41 52 54 20 55 31 21 ART U1! ------ APRS Message must begin with : 9 character addressee : APRS Message, HELO Opening log file "2020-05-02.log".  SR9KRA-6 audio level = 199(56/52) [SINGLE] ___::____ Audio input level is too high. Reduce so most stations are around 50. [0.3] SR9KRA-6>APDST4-6,WIDE1-1,WIDE2-1::SP6ZWR:KrakSat START U1! ------ U frame UI: p/f=0, No layer 3 protocol implemented., length = 55 dest APDST4 6 c/r=0 res=3 last=0 source SR9KRA 6 c/r=0 res=3 last=0 digi 1 WIDE1 1 h=0 res=3 last=0 digi 2 WIDE2 1 h=0 res=3 last=1 000: 82 a0 88 a6 a8 68 6c a6 a4 72 96 a4 82 6c ae 92 .....hl..r...l.. 010: 88 8a 62 40 62 ae 92 88 8a 64 40 63 03 f0 3a 53 ..b@b....d@c..:S 020: 50 36 5a 57 52 3a 4b 72 61 6b 53 61 74 20 53 54 P6ZWR:KrakSat ST 030: 41 52 54 20 55 31 21 ART U1! ------ APRS Message must begin with : 9 character addressee : APRS Message, HELO  SR9KRA-6 audio level = 199(56/55) [NONE] ___|_____ Audio input level is too high. Reduce so most stations are around 50. [0.3] SR9KRA-6>APDST4-6,WIDE1-1,WIDE2-1:=KrakSat START U2!<0x00> ------ U frame UI: p/f=0, No layer 3 protocol implemented., length = 49 dest APDST4 6 c/r=0 res=3 last=0 source SR9KRA 6 c/r=0 res=3 last=0 digi 1 WIDE1 1 h=0 res=3 last=0 digi 2 WIDE2 1 h=0 res=3 last=1 000: 82 a0 88 a6 a8 68 6c a6 a4 72 96 a4 82 6c ae 92 .....hl..r...l.. 010: 88 8a 62 40 62 ae 92 88 8a 64 40 63 03 f0 3d 4b ..b@b....d@c..=K 020: 72 61 6b 53 61 74 20 53 54 41 52 54 20 55 32 21 rakSat START U2! 030: 00 . ------ 'nul' character found in Information part. This should never happen. It seems that SR9KRA-6 is transmitting with defective software. Invalid character in compressed longitude. Must be in range of '!' to '{'. Position, Thunderstorm w/overlay K S 71 38.8946, Invalid Longitude, alt 371 ft U2!  SR9KRA-6 audio level = 199(54/52) [NONE] ___|_____ Audio input level is too high. Reduce so most stations are around 50. [0.3] SR9KRA-6>APDST4-6,WIDE1-1,WIDE2-1::SP6ZWR: BOOT NR 642365 ------ U frame UI: p/f=0, No layer 3 protocol implemented., length = 60 dest APDST4 6 c/r=0 res=3 last=0 source SR9KRA 6 c/r=0 res=3 last=0 digi 1 WIDE1 1 h=0 res=3 last=0 digi 2 WIDE2 1 h=0 res=3 last=1 000: 82 a0 88 a6 a8 68 6c a6 a4 72 96 a4 82 6c ae 92 .....hl..r...l.. 010: 88 8a 62 40 62 ae 92 88 8a 64 40 63 03 f0 3a 53 ..b@b....d@c..:S 020: 50 36 5a 57 52 3a 20 20 20 20 20 20 20 20 42 4f P6ZWR: BO 030: 4f 54 20 4e 52 20 36 34 32 33 36 35 OT NR 642365 ------ APRS Message must begin with : 9 character addressee : APRS Message, HELO  QRT Closing log file "2020-05-02.log".