Hi folks!. How are you?!
I started to set up a ground station using a laptop and Debian 10, but unfortunately, I couldn’t. I thought it would be just a weekend project. Trying to make something run before the weekend ends, I started to set up the SatNOGS client on a Raspberry Pi 3, and this was the result:
By the way, I’ll post my experience on Debian 10 Desktop as well, hoping for more experienced mates to give a hand on this.
Setting up SatBONGS client on Raspberry Pi 3
Omnidirectional ground station
RTL-SDR dongle (RLT2832U)
Following the steps described next:
Data integrity verification:
$ sha256sum -c sha256sums
Image file unzipped and then flashed using ISO Image Writer on Manjaro Linux .
Wired Ethernet and a USB keyboard are used.
Raspberry Pi setup:
$ sudo raspi-config
set zone to London
set timezone to UTC
wifi country no set
$ sudo apt-get update
$ sudo apt-get upgrade
$ sudo reboot
Following step 2 from:
logged in using settings by default:
$ sudo satnogs-setup
SATNOGS_API_TOKEN API token from the station
SATNOGS_STATION_ELEV station elevation in meters
SATNOGS_STATION_ID station ID from network.satnogs.org
…And here the problem comes up:
I’m just an amateur, so any comment about this is very appreciated.